SHURE FOAM WINDSCREEN / SHIELD / POP FILTER
NOS A2WS-BK
CIRCA 1980
(individually, hermetically sealed so foam is fresh)
Made in Korea
NOT CHINESE!!!
Fits Shure SM56, SM57, SM77, 545 & 546 Microphones
We just received a batch of hermetically sealed
for the military (from 1981),
original, Shure, model A2WS, OEM, 'Black' foam
wind screens. These are hermetically sealed in airtight foam / Mylar
envelopes from military / air line surplus. The foam is as fresh as the day
it was made. Locking collar intact. Comes in original OEM packaging.
The original Shure A2WS Locking Foam Wind-screen is designed with
acoustically transparent materials to reduce unwanted breath and wind noise
without, detrimentally affecting the sound quality. It prevents annoying 'P'
pops and excessive sibilance from a speaker or performer talks or sings
closely into the microphone. Also, of course shields the microphone from
rushing sounds in adverse wind conditions, as well as adds a bit of 'safety'
to the somewhat fragile cage of the SM57 in case of a dropped mic. I use one
on the SM57 mic'ing my acoustic guitar to reduce
the noise from occasionally bumping it with my guitar body. Locks securely
to the microphone with a set screw.
Replace the old,
rotton foam wind screen on your SM57 and other mics. Personally, I
have always used and preferred my original, Unidyne III
SM57 microphones for vocals, but
ONLY if
fitted with an 'Original' Shure, foam wind screen. The 'knock-offs'
and simply foam 'socks' do NOT
sound the same.
NOS
limited, small quantity available
(Microphone and clip in photo, NOT included.)
Location: PB, West, Southern-most / Black,
First cab, 3rd drawer -
Revised 4/3/2023
$24.99 each plus shipping*
or
$34.99 2-pack
plus shipping*
*Other world destinations have an additional shipping charge.
|
