Purveyors of Electronic, Musical
and Vintage goods
from then, now and in between.
ONKYO STEREO PARTS
/ SPARES - USED
Onkyo Stereo Parts for Onkyo Integra stereo graphic
*Note about parts / spares sales
* Our "parts units", parts / spares and related reference information are primarily archived for the purpose of restoration / repair of "Oak Tree Vintage" units first. Only if we do not have a "viable" unit in yet, either already in process or in line to be processed, that may potentially need parts from a "parts unit", will we release available parts for sale (even though they may appear as available for sale to the public). As many of you know, the restoration of a unit can be a long, time consuming process. We may "lock up" parts that we may potentially need in the restoration of a unit (and not necessarily get it marked 'Hold' or 'Sold' on the site right away). Parts are priced according to the "potential value" of the unit they can be applicable to (meaning the amount WE would be willing to pay for the part if that was all that was standing between us having a "shelved unit" or a valuable / sellable unit), time to extract, their rarity & their condition to name a few criteria and likely will be completely unrelated to the original cost / price of a part when it was currently available from the manufacturer.
Parts Photos; We get a number of requests for 'photos' of a specific part. Unfortunately, in most cases that is not practical as the amount of time involved in posting that exceeds the value of the 'unique' part. We will sometimes post photos of less 'unique' parts, if there is a greater chance of them being available in multiple quantities, or on a more 'repeat' basis.
Shipping: Shipping on most 'small' parts if typically via Postal first class or Postal Priority for both domestic (USA) and international orders. Larger parts such as transformers and drivers (speakers) are typically via FedEx gnd.
Some parts sales such as those for empty 'speaker cabinets', empty 'component cabinets / covers / bonnets' and 'speaker grills' are 'doomed' from the start. Due to their size and required packing supplies, the cost of 'packing for safe transit' and shipping are commonly 'disproportionate' to their cost, typically nearly equal to and sometimes greater than the cost of the part. Think about it. An empty speaker cabinet or stereo receiver case is essentially the same size as a complete one. Yes the weight will be less, but most of items that size are calculated on 'dimensional weight', not actual weight so are commonly just as expensive as shipping a 'complete unit'. Secondly empty component cabinets have to be packed to disallow breakage, typically requiring nearly as much packing materials as an entire unit. Speaker grills have to be 'sandwiched' between foam sheets in large, custom ordered boxes (all relatively expensive). It is what it is....
A non-response to an email of phone call / voice message request for a part (we may appear to have), likely means that we are still determining which parts we are going to need for the restoration or repair of one of our units. Again, the parts are first for the restoration of our units and secondarily for the public market. Since we list the parts available for ourselves, it is not much effort to modify the menu's for web publication, which in turn makes the reference information and occasionally the part available to the public. Frankly, publishing them to the web, in many instances, makes it easier for us to determine if we have the part for our needs as well. The alternative to all of the above would be to not offer them at all to the public, however most parts are available to the public for sale. Also, parts requests can occasionally take time for us to respond to. While we may have a part listed, and we like to keep the website 100% accurate, occasionally a part will be 'used by us' or 'previously sold' and we by oversight, and we did not get the web listing marked "SOLD", or the part gets 'mis-placed' or 'lost' (laid down somewhere in the warehouse(s) and then it get's lost track of (that happens to our coffee cups all the time, then we find it months later with 'a good batch of 'penicillin' growing in it), so we like to 'lay eyes on it' prior to responding. Sometimes we just can't figure out which cabinet or drawer parts were assigned to (and we're working on a system for that one).
Some folks email / call and want us to respond either way / whether we have the part or not. We simply do not have the time resources to do that. Our time must be utilized on the requests we can fulfill.
Sorry for all the excuses, but that's how the 'system' (or lack thereof) works.
And, if you don't see it, we likely don't have it.
Thank you for your understanding.
$20. MINIMUM ORDER
20% off sale on salvage stereo parts.
See sales banners on parts pages for details
Most of these components are "take-outs" from stereo gear that for various reasons we 'chopped' and unless otherwise noted are in serviceable / working condition / shape!
In the case of output transistors, they will be tested / checked prior to posting and once again prior to shipment, pots / switches will be 'cursory' cleaned, parts already missing / utilized from circuit board will be noted, transformers will be checked prior to posting. Filter capacitors will be tested / checked prior to posting and once again prior to shipment and 're-conditioned' / 're-formed' if necessary.
|MOST OF THE PARTS LISTED BELOW ARE FROM SALVAGE UNITS.|
(Click on above thumbnails to enlarge photos)
PARTS / SPARES
Bonnet, Black metal - SOLD
Face Plate Good condition - $45.
Display, "Operation Mode" entire circuit board w/ lights, Good condition - $35.
Knobs / Caps / Buttons / Covers, Black fader caps, WITH clear plastic / plexi-glass 'light pipe' insert - $8.50 ea. (LED sold separately) SOLD
Knobs / Caps / Buttons / Covers, Black fader caps, WITHOUT clear plastic / plexi-glass 'light pipe' insert - $5. ea. ONLY 3 left in stock NO clear plastic insert (LED sold separately)
LED's, Green Linear fader LED's - $8.50 ea. 5-6 left in stock
Knobs / Caps / Buttons / Covers, Push switch caps, Black plastic caps (either style) - $12.50 ea.
Knobs / Caps / Buttons / Covers, Power switch caps, Black plastic caps (either style) - $22.50 ea.
Linear pots / Faders - $35. ea (less LED and Cap which are sold separately) ONLY 1 LEFT IN STOCK THAT ISN'T BROKEN
Switch, Power Switch ALPS SDGA-1P - $35.
Switches, "MODE - Source / Sweep / Spot" (bank of 3 on circuit board ) - $35.
Switches, "Range" - $20.
Switches, "Display L / R" - $20. ea.
Switches, "Record Selector - Source / EQ Effect / Off" (bank of 3 on circuit board YS-1494V-0 RECORD) - $35.
Switches, "EQ INPUT - Tape / Source/OSC / Off" (bank of 3 on circuit board) - $35.
Switches, "OUTPUT - Tape / EQ Effect / Source/OSC" (bank of 3 on circuit board YS-1494V-0 OUTPUT) - $35.
Circuit Board-Main, 50-20188 Main Circuit Board w/ IC's; Hitachi 14017BP, JRC 7019, & Toshiba 4011BP, 4093BP , Transistors; 2SA1015, 2SB647, 2SC1815, 1346, 3401, Rectifier W02M-8724 and balance of capacitors, diodes and resistors. (Relay and I/O jacks sold separately) - $45.
Transformer, Power supply Transformer 41501 7G - $25.
Relay, Takamisawa RZ-12 relay - $25.
Jacks, RCA Input / Output jacks for "Equalizer" or "Tape" - $25. per bank of four
Jacks, AC convenience outlet jack - $18.
Panel, Sheet Metal Back Panel (parts removed)- $35.
Call or Email for "SHOWN and NOT marked 'SOLD' " part you need.
Location; Simplicity, top #1 slot - revised 9/28/17
Unless specifically noted, we do not typically sell 'component level' parts such as resistors, diodes, transistors, semiconductors, ic's / integrated circuit chips, ceramic capacitors, led's, bulbs, lamps, belts, etc. We do commonly sell circuit boards / cards which will likely come with those parts attached.
*When we say "some parts "MAY" also fit", that does NOT mean ALL the parts listed 'WILL' fit, and unless we show specific info that a particular part DOES 'cross-pollinate', do not infer that it does or will fit. Only careful research and comparisons, on YOUR part with service manuals, service bulletins, other comparable units, etc., MAY indicate a POSSIBLE substitution. If your situation is 'critical', do not base your decision on information found on this or any other page of this web site and do your own research.
(Click on above thumbnails to enlarge photos)
ONKYO P-306RS PARTS / SPARES FOR REFERENCE ONLY
This is a listing of 'Significant' parts for cross-reference ONLY. We do not have this unit available for parts, this information is ONLY for cross-reference.
Switch Rotary; Input / Record Selector #65175-5231
Potentiometer / Control; Volume pot SN5104077
Potentiometer / Control; Balance pot SN5104126
Potentiometer / Control; Bass pot SN5104124
Potentiometer / Control; Treble pot SN5104125
Power Transformer; #NPT-754D6
Again these parts are not available from this unit so we do not have them, nor know who might have them. This unit was not parted out and was sold complete.
Wondering where the "tone" you remember went?....
.... Surround yourself with Silver and find it again!
CONTACT INFO BELOW
$20. MINIMUM ORDER
Before calling, PLEASE read the text in below.
(800) 806-4231 EXT #1
~9:30 AM- ~7:30 PM most days COLORADO / ROCKY MOUNTAIN TIME ZONE
OR EMAILING email@example.com
We DO NOT have your part unless the following conditions are met:
A) You HAVE SEARCHED our page(s) and HAVE FOUND the part you are looking for SPECIFICALLY listed on one of our pages or you have solid information that it's a 'bona fide' substitution for your part (unless noted already, we won't have any further info along those lines)
B) The part that you have found is NOT marked as SOLD or SOLD OUT.
If you do not see it listed after thoroughly searching the pertinent page (likely the page you landed on originally),
we do not have it,
nor do we know when it might come in,
nor do we maintain "waiting lists" for parts,
nor do we know who might have it.
Sorry, but phone and email traffic for parts we don't have listed or for parts that are already marked "SOLD" has become too consuming of time resources.
We try to keep these pages 99+% updated.
If you don't see the part you are looking for, simply check the web page periodically as we never know what will show up each day. Thanks!!!!!
ALSO: When e-mailing be sure to include a relevant subject, ie: Brand / Model number / reason for inquiry in the 'SUBJECT LINE'.
SUBJECT lines left empty, or with 'single word' text like;
"Hello", "Hi", "parts", "stereo", "inquiry", "question", "selling" or similar or similar 'un-qualified' terms may automatically be deleted by Anti-Virus / Spam settings or receive 'Low Priority'.
(Subject lines left empty show up as "No Subject" and are deleted automatically by our anti-spam settings"
SPEAKER PARTS | STEREO / HI-FI ELECTRONIC PARTS | KEYBOARD PARTS
Haven't received a response to your email? See FAQ'S
OAK TREE ENTERPRISES
PO. BOX 6182
COLORADO SPRINGS, CO 80934
Before ordering by postal mail, please phone or email us about the item and the details of sending your funds. Thank-you.
SPEAKER PARTS | STEREO / HI-FI ELECTRONIC PARTS | SELLING-TRADING-CONSIGNING | KEYBOARD PARTS I FAQ'S
CONDITION RATINGS | ORDERING / POLICIES | WARRANTIES / RETURNS | SHIPPING
RESTORATION PROCEDURES | REPAIRS | CONTACT PARTS
As much of the price charged for parts is for the 'time to extract' from it's donor unit, unless we send the 'wrong part', parts are NOT returnable.
See our "Warranties / Returns" page via the link below for more details.
POLICIES, SPECIFICATIONS, AVAILABILITY, INFORMATION AND PRICING SUBJECT TO CHANGE AT ANYTIME AND WITHOUT PRIOR NOTICE
and changes may not be posted to web immediately. Information such as Parts Substitution possibilities, "Circa" dates, original values, etc. are to the best of our knowledge. If you are critically concerned, you should do independent research on your own prior to ordering or utilizing this information in any way. Manufacturers also are known to change part numbers, specs, circuit designs, specs etc within the same model.
Copyright © 1997-2019 Oak Tree Enterprises, LLC