Purveyors of Electronic, Musical
and Vintage goods
from then, now and in between.
We have a Yamaha MC-1202 we are
parting out, so possible Yamaha replacement parts for models MC-802 / MC-1202 /
MC-1602 / MC-1204 MC802 / MC1202 / MC1602 mixing / mixer board / console
electronic parts, pots, knobs, controls, switches, faders etc
about parts / spares sales
* Our "parts units", parts / spares and related reference information are primarily archived for the purpose of restoration / repair of "Oak Tree Vintage" units first. Only if we do not have a "viable" unit in yet, either already in process or in line to be processed, that may potentially need parts from a "parts unit", will we release available parts for sale (even though they may appear as available for sale to the public). As many of you know, the restoration of a unit can be a long, time consuming process. We may "lock up" parts that we may potentially need in the restoration of a unit (and not necessarily get it marked 'Hold' or 'Sold' on the site right away). Parts are priced according to the "potential value" of the unit they can be applicable to (meaning the amount WE would be willing to pay for the part if that was all that was standing between us having a "shelved unit" or a valuable / sellable unit), time to extract, their rarity & their condition to name a few criteria and likely will be completely unrelated to the original cost / price of a part when it was currently available from the manufacturer.
Parts Photos; We get a number of requests for 'photos' of a specific part. Unfortunately, in most cases that is not practical as the amount of time involved in posting that exceeds the value of the 'unique' part. We will sometimes post photos of less 'unique' parts, if there is a greater chance of them being available in multiple quantities, or on a more 'repeat' basis.
Shipping: Shipping on most 'small' parts if typically via Postal first class or Postal Priority for both domestic (USA) and international orders. Larger parts such as transformers and drivers (speakers) are typically via FedEx gnd.
Some parts sales such as those for empty 'speaker cabinets', empty 'component cabinets / covers / bonnets' and 'speaker grills' are 'doomed' from the start. Due to their size and required packing supplies, the cost of 'packing for safe transit' and shipping are typically nearly equal to and sometimes greater than the cost of the part. Think about it. An empty speaker cabinet or stereo receiver case is essentially the same size as a complete one. Yes the weight will be less, but most of items that size are calculated on 'dimensional weight', not actual weight. Secondly empty component cabinets have to be packed to disallow breakage, typically requiring nearly as much packing materials as an entire unit. Speaker grills have to be 'sandwiched' between foam sheets in large, custom ordered boxes (all relatively expensive). It is what it is....
A non-response to an email request for a part (we may appear to have), likely means that we are still determining which parts we are going to need for the restoration or repair of one of our units. Again, the parts are first for the restoration of our units and secondarily for the public market. Since we list the parts available for ourselves, it is not much effort to modify the menu's for web publication, which in turn makes the reference information and occasionally the part available to the public. Frankly, publishing them to the web, in many instances, makes it easier for us to determine if we have the part for our needs as well. The alternative to all of the above would be to not offer them at all to the public, however most parts are available to the public for sale.
BOTTOM LINE IS; IF YOU DON'T SEE IT AVAILABLE FOR SALE, WE DON'T HAVE IT!
Thank you for your understanding.
20% off sale on salvage stereo parts.
See sales banners on parts pages for details
Most of these components are "take-outs" from stereo gear that for various reasons we 'chopped' and unless otherwise noted are in serviceable / working condition / shape!
In the case of output transistors, they will be tested / checked prior to posting and once again prior to shipment, pots / switches will be 'cursory' cleaned, parts already missing / utilized from circuit board will be noted, transformers will be checked prior to posting. Filter capacitors will be tested / checked prior to posting and once again prior to shipment and 're-conditioned' / 're-formed' if necessary.
(Click on above thumbnails to enlarge photos)
YAMAHA MC-1202 MIXING BOARD / CONSOLE PARTS / SPARES
Parting Out. Everything worked, it was just pretty beat up cosmetically.
SOME PARTS MAY* ALSO FIT YAMAHA EM-1600, EM-2820, MC-802 / MC-1202 / MC-1602 / MC-1204
MC802 / MC1202 / MC1602, PM-1200 and possibly others (we don't have any 'substitution' info, so do your research first)
MIXING / MIXER BOARD / CONSOLE PARTS
POTS, KNOBS, CONTROLS, SWITCHES, CHANNELS ETC FOR SALE
Panel, Bottom Panel - SOLD ?
Panel, Side panels - $30. ea. 1 left
Rear plastic end caps - $15. ea
Panel, Rear patch panel (sheet metal only, less components) - $30.
Panel, Sheet metal side plates - $25. ea.
Transformer, Power supply transformer MC-81216 - $55. SOLD
Circuit Board, Power supply filter cap board MC-E - $35.
Circuit Board, 'Master Fader' Circuit Board MC-F - $35.
Circuit Board, Headphone Circuit board MC-L (less stereo faders) - $35. SOLD
Channel, Any Single, complete channel module MC-A (complete, except for knobs / switch caps, but including control pots, faders and switches. Simply plug in*, install your existing knobs and re-assemble) - $65. ea.
(*we just discovered that there are at least, two different versions of connectors on these boards, with no distinguishing part number designation. The version(s) may be based on the serial number of the entire mixer chassis)
Potentiometer / Control, Channel linear fader / slide potentiometer. Yamaha part # HX802030 / 10KAX1 - $25. ea.
Potentiometer / Control, Master linear fader / slide potentiometer (VR 201 / VR 202). Yamaha 10KA - $35. ea.
Potentiometer / Control, Any Rotary pot / control (Gain 10kΩ, High 50kΩ w/ center detent, Mid Frequency 100kΩ, Mid 50kΩ w/ center detent, Low 50kΩ w/ center detent, AUX 1, 2 or 3 25kΩ, Pan dual 25kΩ w/ center detent, Phones, TB) $20. ea
YAMAHA MC-802 / MC-1202 / MC-1602 / MC-1204 / MC802 / MC1202 / MC1602 PARTS / SPARES
Switch, Power switch - $25.
Switch, Any push / Cue switch (cap sold separately) - $15. ea.
Knob, Button, switch cap, Any rotary / round knob - $15. ea.
Knob, Button, switch /fader cap, Any 'White' Linear 'Channel' Fader Level cap - $15. ea
Knob, Button, switch / Fader cap, Any 'Red' Linear 'Master' Fader Level cap - $20. ea SOLD OUT
Knob, Button, switch cap, Any push switch cap - $8.50 ea.
'Push Button' Cue caps can be "mix-n-match, quantity of 6 for $30. (no other discounts apply on the knob package)
YAMAHA MC-802 / MC-1202 / MC-1602 / MC-1204 / MC802 / MC1202 / MC1602 PARTS / SPARES
Meters, VU meters - $30. ea. SOLD OUT
Jacks, Metal XLR inputs - $15. ea
Jacks, Headphone Jack - $25.
Fuse Holder, (less cap, sold separately) - $20. SOLD
Fuse Cap - $25.
Jacks, Any 1/4", phono jack (Line-In, Sub, Insert, AUX, etc) $15. ea.
Keep in mind the quantity discount for multiple parts mentioned above in RED.
*When we say "some parts MAY also fit", that does NOT mean ALL the parts listed 'WILL' fit, and unless we show specific info that a particular part DOES 'cross-pollinate', do not infer that it does or will fit. Only careful research and comparisons, on YOUR part with service manuals MAY indicate a POSSIBLE substitution. If your situation is 'critical', do not base your decision on information found on this or any other page of this web site and do your own research.
Wondering where the "tone" you remember went?....
.... Surround yourself with Silver and find it again!
CONTACT INFO BELOW
$20. MINIMUM ORDER
Before calling, PLEASE read the text in orange below.
No Really...Stop, Alto, Halt, etc.
(800) 806-4231 EXT #1
OR EMAILING firstname.lastname@example.org
~9:30 AM- ~7:30 PM most days COLORADO / ROCKY MOUNTAIN TIME ZONE
We DO NOT have your part unless the following conditions are met:
You HAVE SERCHED our page(s) and
HAVE FOUND the part you are
SPECIFICALLY listed on one of our pages or
solid information that it's a 'bona fide' substitution for your part
(unless noted already, we won't
have any further info along those lines)
B) The part that you have found is NOT marked as SOLD or SOLD OUT.
If you do not see it listed after thoroughly searching the pertinent page (likely the page you landed on originally),
we do not have it,
nor do we know when it might come in,
nor do we maintain "waiting lists" for parts,
nor do we know who might have it.
Sorry, but phone and email traffic for parts we don't have listed or for parts that are already marked "SOLD" has become too consuming of time resources.
We try to keep these pages 99+% updated.
If you don't see the part you are looking for, simply check the web page periodically as we never know what will show up each day. Thanks!!!!!
ALSO: When e-mailing be sure to include a relevant subject, ie: Brand / Model number / reason for inquiry in the 'SUBJECT LINE'.
SUBJECT lines left empty, or with 'single word' text like;
"Hello", "Hi", "parts", "stereo", "inquiry", "question", "selling" or similar or similar 'un-qualified' terms will automatically be deleted by Anti-Virus / Spam settings or receive 'Low Priority'.
(Subject lines left empty show up as "No Subject" and are deleted automatically by our anti-spam settings"
SPEAKER PARTS | STEREO / HI-FI ELECTRONIC PARTS | KEYBOARD PARTS
Haven't received a response to your email? See FAQ'S
OAK TREE ENTERPRISES
PO. BOX 6182
COLORADO SPRINGS, CO 80934
Before ordering by postal mail, please phone or email us about the item and the details of sending your funds. Thank-you.
SPEAKER PARTS | STEREO / HI-FI ELECTRONIC PARTS | SELLING-TRADING-CONSIGNING | KEYBOARD PARTS I FAQ'S
CONDITION RATINGS | ORDERING / POLICIES | WARRANTIES / RETURNS | SHIPPING
RESTORATION PROCEDURES | REPAIRS | CONTACT PARTS
30% restock fee / service charge applies to all 'parts' returns for refund.
Some parts are not returnable.
See our "Warranties / Returns" page via the link below for more details.
POLICIES, SPECIFICATIONS, AVAILABILITY, INFORMATION AND PRICING SUBJECT TO CHANGE AT ANYTIME AND WITHOUT PRIOR NOTICE
and changes may not be posted to web immediately. Information such as Parts Substitution possibilities, "Circa" dates, original values, etc. are to the best of our knowledge. If you are critically concerned, you should do independent research on your own prior to ordering or utilizing this information in any way. Manufacturers also are known to change part numbers, specs, circuit designs, specs etc within the same model.
Copyright © 1997-2015 Oak Tree Enterprises, LLC