Categories

Home
Hi-Fi / Stereo Gear
Speakers
Receivers
Tuners
Amps / Pre-Amps
EQs / Signal Procs
Cassette Decks
Reel - Reel Decks
Turntables
Cartridges
8 Track Players
Headphones
Speaker Parts
Stereo Parts
HI-Fi Accessories

Customer Care

Contact Us
Repair Resources
Restoration Steps

Purveyors of Electronic, Musical and Vintage goods from then, now and in between. 
Since 1982.

PHOTO GALLERY OF
MISCELLANEOUS HI-FI AND ACCESSORIES

- SOLD UNITS -
 

 

 
 

  This area is for photo archiving for our web site administration only. If you found this page and are looking for items to purchase, click the links above or  below. All photos and text, are copyrighted and protected as stated at bottom of page.
 

Click here for our main Audio / Stereo / Hi-Fi pages





TURNTABLE / CD / DVD PLAYER / TUBE GEAR / SUBWOOFER SPEAKER / SPRING REVERB, SORBOTHANE-SILICON ISOLATION FEET

Finally we found THE ANSWER to Turntable / CD / DVD player / Tube Gear / Subwoofer / Speaker / Spring Reverb Isolation.
We have looked for years and tried many hair-brained ideas, none of which either worked nor were practical,
Until Now!

These silicon Dome-Pucks are the perfect answer for most isolation situations, where you want to reduce or eliminate the noise / vibration caused by outside influences to your Turntable, CD / DVD player or Analog Spring Reverb. Simply stick on the bottom of the unit you wish to isolate. They are VERY "tacky" so will stay in place long enough to position the unit. Once there they stay put not only from their self stick properties, but simply from the weight of the unit on top of them. Can be removed by peeling off slowly and then re-stuck to another surface.

They are sold in sets of four and we have a very limited quantity (we were only able to purchase about a dozen sets and we're keeping a few sets for our own gear).



(click on above thumbnails to enlarge photos)

These are also great for supporting light-medium weight speakers to reduce vibration and turntable rumble and to reduce the level of sound transferred through the floor & walls of apartments for less annoyed neighbors. These would also have many other uses as isolation mounts / bumpers. Each measures 2" in diameter and 1" in height. They are each a half-sphere in shape.

Set of 4
$XX
SORRY, UNFORTUNATELY SOLD OUT
 

 

Diamond_1U_Full_Web.jpg (28361 bytes)
Diamone_1U_X-up_web.jpg (46514 bytes)

NEW ITEM!
POLISHED
DIAMOND PLATE
  ALUMINUM RACK PANELS!


What a great way to dress up your rack. These are custom made for us to fit standard 19" racks. They are 1 space in height (1.75"). Each one is handmade to our specifications. They have a great polished finish with Diamond pattern that looks great with any Chrome, Polished Aluminum or silver-face Guitar, Pro-Audio or Hi-Fi gear. Each one comes with a full set of 4 of our exclusive chrome rack screws, bevel grommet washer and nylon protection washer. These make your Digitech, Marshall, Mesa-Boogie, Sansui, Pioneer, Yamaha, Kenwood, JVC, Teac, Tascam, Alesis, Marantz or any other rack mount gear look great!
NEW!

SORRY, NO MORE LEFT :-(



 Brushed_1U-X-UP_web.jpg (20577 bytes)

NEW ITEM!
BRUSHED ALUMINUM RACK PANELS!

Finally, Back in Stock!
What a great way to dress up your rack. These are custom made for us to fit standard 19" racks. They are 1 space in height (1.75") and are 3mm thick. Each one is handmade to our specifications. They have a great brushed finish that looks great with any silver-face Hi-Fi gear. You could also custom drill them for jacks, connectors or any other need. Each one comes with a full set of 4 of our exclusive chrome rack screws, bevel grommet washer and nylon protection washer. These make your Sansui, Pioneer, Yamaha, Kenwood, JVC, Teac, Tascam, Alesis, Marantz or any other rack mount gear look great!
NEW!

SORRY, NO MORE LEFT :-(

 

 

     

 

(click on above thumbnails to enlarge photos)
CHROME / NICKEL PLATED
10-32 RACK SCREWS

These great looking rack screws will dress up your silver or Champaign faced Hi-Fi or Studio rack. Perfect for Pioneer
racks and rack accessories such as; Pioneer JA-R2S, JA-R101, JA-R102, JA-R104, and Pioneer components such as the Pioneer
SA-9500 II CT-F1000, 1250, RT-909 / 901 707 RT-701, TX, Spec 1 2 3 series pre power amps / amplifiers, Crown DC-300, IC-150 / 150A, EQ2, Kenwood, Phase Linear 4000 / 400 / 200 / 700, Rotel RX receivers, Equalizers, Pre-amps, Integrated amps and Power Amps, Tascam DA-38 / DA-88, Teac, Sansui, Alesis, JVC, Mesa-Boogie or any other brand with a lighter finish face plate / chassis. They are a high quality, chrome plated screw that comes supplied with matching, machine milled, counter-sunk finish grommet, and nylon bushing / washer. They are designed for standard US threaded racks and will even fit SKB type clips. Super high quality.
SOLD IN SETS OF 4

 1-3 sets / $28.50 each + $6.50 shipping*

Purchase 4 sets  at $28.50 each and get a 5th FREE including shipping any of the 50 states.

Rest of the planet / International shipping is $14.50 for any quantity up to 5.

 

* $6.50 Domestic shipping covers any quantity up to 8 sets.



 

Woods_4xSpkr_Switcher_web.jpg (29874 bytes)    Woods_4xSpkr_Switcher_collage.jpg (81493 bytes)
(click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes)warranty
WOODS
2 AMP / 4 SPEAKER SWITCHER
This is an incredibly handy tool. Can accept input from 1 of 2 different input amplifiers and switches between 1-4 sets of speakers in any combination or plays all at once. Ingenious design maintains at least a 4 ohm load as long as any one set of speakers is no lower than 8 ohms. Not designed for use with 4 ohm or lower speakers, and should not be connected to amplifiers not capable of a minimum 4 ohm load. High quality switches combined with spring loaded speaker wire clips make this an easy to use, durable switcher. Specs are: 120 watts RMS and capable of handling 220 watt peaks! Spring loaded connectors will handle up to 12 gauge wire. Great for multiple speaker use in the home or business, and will also work with paging and PA systems. Great for demo'ing speakers in a small store area, or for showing off your collection. Dual amp inputs also great for hearing the difference between amplifier classes or types of outputs. Comes with instructions including hook-up diagrams and is made in the USA! Unit measures 9" wide x 4.5" deep and 2.25" high and weighs ~ 2 lbs. Includes 90 day warranty.
New
SOLD OUT

 

 

Pioneer_RT-707_PR-85_7-Inch_Metal_Aluminum_Tape_Take-up_Reel_Reels_web.jpg (73508 bytes)
PIONEER
7-inch Metal Take-up Reel
Reels
PR-85
FOR SALE
7" aluminum reel for 1/4" tape. These are in great shape. No dents or scratches. If you have a Pioneer RT-707, 909 or other Pioneer deck then you should have at least one official Metal Pioneer Take-Up reel.
Cond. 10

SOLD


Kenwood_KH-71_Stereo_Headphones_web.jpg (31684 bytes)
CheckMarkSmall_web.jpg (792 bytes)warranty
KENWOOD
KH-71
SOLD
Vintage Stereo Headphones

Classic "Buckskin" Leather Kenwood KH-71 Stereo Headphones in great condition. Ear cup external covering is real leather. Headband covering is matching finish vinyl. Fully adjustable. 12' black cloth cord also perfect. Normal wear to ear cup padding finish. Work and sound GREAT! Includes our standard 90 day limited warranty.
Cond. 8

SOLD
Kenwood_Rack_Ears-Handles_Large_web.jpg (33207 bytes)     Kenwood_Rack_Ears-Handles_Large_collage.jpg (105622 bytes)

(click on above thumbnails to enlarge photos)
KENWOOD
ORIGINAL RACK HANDLES / EARS

for sale
Great way to dress-up rack and carry your classic Kenwood audio gear. Will fit KA-3500, KA-5700, KA-7100, KA-8300 amplifiers and KT-5500, KT-5300 tuners. Will also fit other gear and we will add their model numbers as that info comes available (some possibilities may include KA-6100, KA-7300 & KT-7500). There are also a few of the larger receivers that these will fit. Overall height 5 1/8". No screws included.
Cond. 8.5

SOLD OUT

 
Sansui_Rack-Handles_Ears_Large_web.jpg (28202 bytes)     Sansui_Rack-Handles_Ears_Large_collage.jpg (99265 bytes)


(click on above thumbnails to enlarge photos)
SANSUI
RACK MOUNT HANDLES / EARS
LARGE SIZE

1 Pair available
Comes with our black "Professional grade" rack screws and washers. 6 1/4" tall. Flat black finish. Look great!

SOLD
Sansui_Med_Rack-Handles_Ears_web.jpg (33490 bytes)    Sansui_Med_Rack-Handles_Ears_collage.jpg (99763 bytes)


(click on above thumbnails to enlarge photos)
SANSUI
RACK MOUNT HANDLES / EARS
MEDIUM SIZE

1 Pair available
Comes with our black "Professional grade" rack screws and washers. 5 7/8" tall. Flat black finish. Look great!

SOLD


         NEW LISTING 9/24/08
(click on above thumbnails to enlarge photos) 

CheckMarkSmall_web.jpg (792 bytes) warranty
AUDIO-TECHNICA
DYNAMIC STEREO HEADPHONES
ATH-M20
NEW!

Great "Closed Back" headphones if you're on a budget. Very reminiscent of vintage designs, in cup styling and headband pad. They even have a "coiled" cord
(coil starts just after section shown in photos).  From the manufacturers site; "
Audio-Technica's ATH-M20 dynamic stereo headphones offer exceptional clarity and maximum comfort for hours of listening. The headphones' low-profile, closed-back design provides superior isolation in high-volume listening situations".
Features:

- Closed Back "Vintage Style" design (Closed-back dynamic stereo headphones deliver exceptional clarity)
-
Rich bass response with extended high end 
-
40 mm drivers, each with a neodymium magnet structure for super power handling and efficiency
 - Lightweight
, adjustable cushioned headband
- Gold-plated stereo 1/8" (3.5 mm) connector with strain relief and snap-on " (6.3 mm) adapter
- Ultra-flexible 10", Vintage Style "Coiled" cable with single-side exit.

Specs
:

Design: Closed Back
Driver Diameter:
40mm
Magnet Material: Neodymium
Voice-Coil: Copper clad Aluminum wire
Nom impedance: 40
Ω
Max input power: 1,200 mw @ 1kHz

Again, these are great "all around" stereo headphones for home or studio use.
NEW
MSRP $70.00

SORRY, NO LONGER AVAILABLE


 
TC-12_2-Way_Audio_Input_Control_web.jpg (46824 bytes)
(click on above thumbnails to enlarge photos)

Tape Monitor- A/B Switch
for sale
Allows 2 RCA input devices such as Tape decks, CD Players, DAT decks, Tuner, Video or any other line-level devices to be linked into a single pair of RCA inputs on a receiver, amplifier or mixer. Comes with primary connection RCA cables built-in. 
NEW
$19.99
SOLD OUT


PioneerRackShelfWithScrews_web.jpg (16691 bytes)

Original
PIONEER RACK SHELF
Cond. 10
SOLD OUT

 

PioneerRackHandles_web.jpg (30329 bytes)

(click on above thumbnails to enlarge photos)

PIONEER
ORIGINAL RACK HANDLES / EARS
JR-201

SOLD 11/28/05

for sale
First set we've had in 2 years. Perfect condition. Will fit CT-F950, CT-F1000 and CT-F1250 cassette decks. May also fit other gear. Comes with new set of 4 Chrome rack screws, bezels and nylon washers (no black chassis mounting screws included). 1 pair only available.
Cond. 9

SOLD 11/28/05
amco.jpg (97497 bytes)

AMCO
MODEL PM2

SOLD
Stax_Headphones_web.jpg (33738 bytes)

STAX
SR-40
Circa 80's
SOLD
Pioneer_PR-101_web.jpg (20834 bytes)
PIONEER
PR-101

10" aluminum reels for 1/4" tape. These utilize hub adaptors or reel inserts (not included). They are in great shape. No dents or scratches. If you have a Pioneer RT-707, 909 or other Pioneer deck that can fit 10" reels then you should have at least one official Metal Pioneer Take-Up reel.
Cond. 10
SOLD OUT
Audio-Technica_ATH-M30_Closed_Back_Professional_Studio_Headphones_web.jpg (44141 bytes)      Audio-Technica_ATH-M30_Closed_Back_Professional_Studio_Headphones_collage.jpg (109182 bytes)
(click on above photos to enlarge)
CheckMarkSmall_web.jpg (792 bytes)warranty
NEW
AUDIO-TECHNICA
ATH-M30
SOLD OUT

 
-Akai_ATR-10_Reels_collage.jpg (57770 bytes)
AKAI
ATR-10
10" METAL REELS
For 1/4" tape and use with hubs.
NOS still in box!
Cond. 10
Very limited quantity!!!
SOLD OUT
Pioneer_RT-707_PR-85_7-Inch_Metal_Aluminum_Tape_Take-up_Reel_Reels_web.jpg (73508 bytes)
(Click on above photos to enlarge)
PIONEER
7-inch Metal Take-up Reel
Reels
PR-85

7" aluminum reel for 1/4" tape. These are in great shape. No dents or scratches. If you have a Pioneer RT-707, 909 or other Pioneer deck then you should have at least one official Metal Pioneer Take-Up reel.
Cond. 10

SOLD 3/15/04
Marantz_SQA-2_SQA2_Quad_Adaptor_Decoder_web.jpg (32223 bytes)    Marantz_SQA-2_SQA2_Quad_Adaptor_Decoder_collage.jpg (57985 bytes)
(Click on above photos to enlarge)
MARANTZ
SQA-2 SQA2
SQ FOUR CHANNEL ADAPTOR / QUAD QUADRAPHONIC DECODER

If you have a 4 channel Marantz receiver or Int Amp you need this to use it in true 4 channel mode. Comes with the 4-original mounting bolts.
SOLD
Akai_RC-20_remote_web.jpg (53930 bytes)
(click on above photos to enlarge)
AKAI
RC-20
SOLD 12/9/03

Tape Deck Remote. Check your owners manual for compatibility (definitely works with X-330D). Tested and works great. 16' long heavy duty cable in great condition with no nicks or cuts. This remote is in like new condition!
1 only.
Cond. 10
SOLD 12/9/03
Akai_RC-16_web.jpg (36220 bytes)
(click on above photos to enlarge)
AKAI
RC-16
SOLD 12/9/03

Tape Deck Remote. Check your owners manual for compatibility.  16' cable and 11-pin connector. NOS still in original box!
1 only!
Cond. 10
SOLD 12/9/03
Ortofon_T-20_Moving_Coil_Cartridge_Transformer_Head-Amp_web.jpg (34442 bytes)   Ortofon_T-20_Moving_Coil_Cartridge_Transformer_Head-Amp_collage.jpg (65537 bytes)
(click on above photos to enlarge)
ORTOFON
T-20
STEP UP TRANSFORMER / HEAD AMP FOR MOVING COIL  CARTRIDGES

Very handy Ortofon T-20 "Head Amp" to allow your moving coil cartridge to function with pre-amps having only a standard magnetic cartridge phono input. Passive operation. Looks new.
Cond. 9.5
SOLD

 

 

 

 

 

Phono_Turntable_Cartridge_Pre-amp_web.jpg (42281 bytes)

 

PHONO PREAMP

DISCONTINUED




PHOTOS OF OLD, DRIED UP, ORIGINAL REEL CLAMPS / HOLDERS / RETAINERS


FRESH, NEW RUBBER
REEL TO REEL TAPE DECK HUB / SPINDLE CLAMPS / REEL HOLDERS / REEL RETAINERS

For Open-reel tape decks. Designed to hold reels on the spindles of decks that did not have built-in Reel locks.
These will fit Akai, Ampex, Concertone, Crown, Dokorder, Panasonic, Pioneer QT-74 / QT-6100 / QT-6600 / T-600 / T-6000 / T-6100, T-6600, T-8800 (and others), Sansui, Sony*, Teac, Rheem, Roberts and other reel-reel tape decks that have standard reel spindles.  Easy and quick to take on and off.

Old, originals are invariable going to be 'slick' and / or have enlarged holes that will not grip the spindle safely / sufficiently anymore.  We know as we have dozens of originals (a few of which are shown above), none of which work well enough to use / trust anymore. Our new / fresh ones are great
to replace your old, dried out / cracked or lost ones.

These are new rubber and will grip well.

$34.99. pair including 'domestic / US' shipping'**
-
Additional pair add $14.50

-
**International / 'non-US' locations add $6.50 shipping

* Still best to use Sony decks in horizontal mode unless you have the original Sony Rubber clamps as they are slightly different w/ a 'wire' clip imbedded inside rubber. These stoppers will work with Sony's when used in horizontal position and if you're 'attentive' while operating the deck, in the 'vertical' position as well.

 

 

 
Audio-Technica_71E_Cartridge_Turntable_web.jpg (26755 bytes)  Audio-Technica_71E_Cartridge_Turntable_collage.jpg (70318 bytes)

(click on above thumbnails to enlarge photos)
NEW
AUDIO-TECHNICA
AT-71ELC AT-71ELC AT71ELC
"GREEN"
1/2" STANDARD MOUNT
TURNTABLE CARTRIDGE
DISCONTINUED

for sale
The Audio-Technica AT-71ELC. Will fit turntables requiring a standard mount cartridge. Another great performing cartridge offering better performance, but keeps the wallet happy. Features a Bonded Elliptical 0.4 x 0.7 mil Diamond stylus for better than average groove tracking. Utilizes Audio-Technicas' own Vector-Aligned dual magnet design for sonic generation. Since the AT-71ELCOT has an elliptically cut diamond stylus it will "blow away" it's slightly cheaper counterparts, the AT70L / AT-70L and CN5625AL (
AT-70L is now discontinued anyway) with their "Close-n-Play" / Toy style "Conical" cut stylus'! At least a good elliptical cut is imperative to accurate sound and lower record wear.
Specs are as follows:

- Elliptical Diamond Stylus
- Elliptically cut Bi-Radial @ 0.4 x 0.7 mil

- Frequency Response: 20-22kHz
- Output 3.5 mV ( 1 kHz, 5 cm/sec)
- Channel Separation; 22 (dB at 1 kHz) / 17 (dB at 10 kHz)

- Channel Balance; 1.5 (dB at 1 KHz)
- Recommended Vertical Tracking Force 1.0-2.0 grams
- Recommended loading impedance 47K ohms (standard, requires only standard phono pre-amp built-into most gear).



If you are looking for a decent sounding cartridge for listening to your albums, but not so much  recording and your budget will not bear the cost of the AT-440MLa or the AT-120E/T then this would make a nice sounding cartridge for your 1/2" mount turntable. 
AUDIO-TECHNICA
AT-71ELC

NEW
MSRP $80.00

These are official Audio-Technica cartridges.
Not Chinese "bootlegs", "grey-market" or knock-offs like the cheaply priced copies seen all over the internet and in on-line auctions
that simply look like the "real thing".


DISCONTINUED

includes "Real-Time, Real-Person" phone support for rebalancing and re-adjusting your tone-arm's user adjustments if required or desired!

90 day full-price upgrade available on this model. *(See below for details)
     
     

 


 

LINKS TO OUR 'HI-FI' DEPARTMENTS

Amps and
Pre-Amps

Receivers

Cassette
Decks

Tuners

Turntables

8-Track Decks

CD Players

Reel-Reel
Decks

EQs and Signal
Processors

Speakers

Betamax and
VHS VCRs

Turntable Cartridges

Tube Audio

Ne'cessories

Speaker Parts

Record Players

Vintage Radios

Vintage
Walkmans

Headphones

Stereo Parts


Wondering where the "tone" you remember went?....

Vintage  Stereo Equipment receivers speakers Classic Silver Audio Collection and jerry gahagan

 

.... Surround yourself with Silver and find it again!



The units on the above page are for photo reference only and are no longer available for sale. To search 'For Sale' units, click on the links in the upper, left corner of page.

   *HOME PAGE*   |   FAQ'S   |   RESTORATION PROCEDURES    |  REPAIR RESOURCES  |  LINKS  


POLICIES, SPECIFICATIONS, AVAILABILITY, INFORMATION
AND PRICING SUBJECT TO CHANGE  AT ANYTIME  AND
WITHOUT PRIOR
NOTICE
and changes may not be posted to web immediately
.
 

Copyright 1997-2016 Oak Tree Enterprises, LLC

COPYRIGHT INFORMATION
 

 

Please be patient while page loads . . .