NAB hub adaptors for Pioneer, Technics, Akai, Teac, Sansui, Teac, Tascam Reel to Reel tape decks allows use of larger 10.5" reels for sale. Pioneer PR-220 220A NAB & Teac TZ-612 .

               


Be sure and check some of our other 100+ pages



NAB HUB ADAPTORS

CLICK HERE FOR MAIN Hi-Fi PAGE

 


 

 

TURNTABLE 
CARTRIDGES
REEL TO REEL
TAPE &
 ACCESSORIES
RACK MOUNT
ACCESSORIES
Turntable Silicon Isolation Feet
- - - -

TESTIMONIALS.
CLICK
HERE TO READ WHAT OUR CUSTOMERS SAY.

BlackRackScrews_bagged_web.jpg (8773 bytes) BlackRackScrewCompare_web.jpg (5522 bytes)   Black_Rack-mount_Screw_collage.jpg (61303 bytes)

(click on above thumbnails to enlarge photos)
WORLDS BEST RACK SCREWS
WE MEAN IT!!!
Yeah I know it's just a rack screw, but if like me,  you've put in many hundreds or thousands of rack screws you know that a good percentage of them will cross-thread as soon as you start them. These will reduce the number of cross threaded starts you will have by many fold. They can even be successfully used to "fix" already cross-threaded holes. The main reason these are different is that their shaft is tapered smaller than the threads so it starts more accurately resulting in much fewer cross-threads. Due to the tapering it is also easier to start one of these screws when you have the screw gun or driver in one hand with the screw already stuck to the end,  and the piece of gear in the other doing a "balancing act" while trying to get the threads started. You can also have less fear starting these with a power driver. No more "gingerly" starting all you screws with a manual driver then switching to your power driver. These also feature an oversized head with matching nylon washer, great for worn, enlarged, or oversized holes in gear. I bet you never thought anyone could talk this long about something a simple as a rack screw, but these things really are the best We've encountered. Each is finished in a durable semi-gloss black coating and comes with size matched nylon bushing. They are designed for standard US threaded racks and will even fit SKB type clips. Sold in a bakers dozen (13).
$14.99 / bag
 

Enough for *6 pieces of gear in a stationary situation or 3 pieces in a mobile road or flight case.
(Larger quantities available upon request)

*
While it is permissible to use only 2 screws to mount most rack-mount items, the screws must be through the lower most holes, not the top ones or  used diagonally. If you use the lower ones, gravity will take care of the top. If there is any chance the rack will be tipped, rolled, inverted, knocked over or moved dynamically in any other way, then all screw holes should be utilized.
 


 

 

Brass_Isolation_Spike-feet_web.jpg (76856 bytes)     Brass_Isolation_Spike-feet_unpkged_web.jpg (48019 bytes)     Black-Chrome_Isolation_Spike-feet_pkged_web.jpg (73060 bytes)

NEW ITEM
(click on above thumbnails to enlarge photos)
OAK TREE VINTAGE
ISOLATION FEET / SPIKES
SOLD METAL CONSTRUCTION
IN BRASS OR BLACK-CHROME
SET OF 4
FOR TURNTABLES AND OTHER COMPONENTS

for sale
These are great for turntables, CD-Players, Speakers or any gear you need replacement feet for or wish to elevate from their shelf or floor. LOOK KILLER! Sold in sets of 4. Come with double-side, rubber discs to adhere them both the the bottom of gear and to adhere the bases to the shelf or floor. Measure 1" in diameter and 1.25" to 1.5" in height and weighs almost a pound!
Gold-Brass or Black-Chrome
NEW
$39.99 set of 4 



NEW ITEM
(click on above thumbnails to enlarge photos)
OAK TREE VINTAGE
ISOLATION FEET / SPIKES
SOLD METAL CONSTRUCTION
IN BRASS OR BLACK-CHROME
SET OF 4
FOR
SPEAKERS
for sale
These are great for Speakers or any gear you need replacement feet for or wish to elevate from their shelf or floor. LOOK KILLER! Sold in sets of 4 (speakers need two sets). Come with "T-Nuts" that are drilled into the bottom of your speaker cabinets. The feet then screw right in. The lower third of each cone is also screw adjustable by another 1/2". Measure .75" in diameter and 1.25" to 1.5" in height and weighs almost a pound!
Gold-Brass or Black-Chrome
NEW
$39.99 set of 4 

 

We are proud to announce the arrival of Audio-Technica turntable Cartridges to our line of high quality audio accessories. Their turntable Cartridges have long been recognized as some of the best quality available while still being one of the most affordable in the industry. 
We are an "Authorized" Audio-Technica dealer, and there is a difference!





(click on above thumbnails to enlarge photos)
NEW
-THE ULTIMATE-
AUDIO-TECHNICA
"SONIC BROOM"
RECORD CARE KIT / CLEANER

for sale
No matter how good your turntable or cartridge is and no matter what condition your albums are in, they will not sound good if they are not clean! For LP's and EP's, the Audio-Technica, "Sonic Broom" system is a great way to go. Clean records are also easier on your stylus and can potentially reduce the risk of damage to speakers. Easy to use and does a great job. 
Kit includes the following:

- Sonic Broom Record cleaning brush
- Brush Storage base
- 2 oz. Audio-Technica Record Cleaning Fluid


Again if you are listening to vinyl and do not have a way to consistently and easily clean you records, you are not getting the most out of your records and system.
AUDIO-TECHNICA
"SONIC BROOM"
NEW
Our price $24.99

 

Phono_Turntable_Cartridge_Pre-amp_web.jpg (42281 bytes)
(click on above thumbnails to enlarge photos)

AC POWERED!
PHONO / TURNTABLE / CARTRIDGE PRE-AMP
with FREE & CORRECT cables

PREAMP PREAMPLIFIER PRE-AMPLIFIER
for sale
Allows a turntable to be connected to either a modern receiver / pre-amplifier that does not have a phono input (just connect to any Tape, CD, DAT, DVD, AUX or similar input using this phono pre-amp) or allows you to connect your turntable directly to your computer to "Burn" CD's (Computer with audio inputs and a CD burner for this operation). This is a Solid State unit and is AC powered. No batteries to worry about. We have been told by a few customers that have ordered these AC powered units, that they  were replacing their DC (battery) powered units because they were tired of replacing their batteries every couple days. Nice quality unit featuring a full 30Hz-20,000kHz frequency response, 6mV input produces 500mV output, 50K ohm input impedance & Signal to Noise ratio of 60 dB. If you have tried to connect your turntable to your non-phono inputs such as Aux, or a Tape / Video input, and gotten very low, without turning your amp way up, or no volume, YOU NEED THIS! That's just how it works. It also has the proper internal RIAA filtering / EQ'ing to eliminate the "muffled" bass sound you get without one of these. Small package can mounted if preferred to your audio cabinet walls. Standard RCA inputs and outputs and ours ships with either the extra RCA cables or the RCA to Stereo Mini-Plug FREE to connect from the Pre-amp to either your receiver / amp or to your computer. (Specify need at time of purchase) Includes our standard 90 day limited warranty. For Magnetic cartridges.
Phono Pre-Amp
NEW
$29.99 
with correct cables

 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Replacement Pioneer RT-909 901 RT909 RT901 NEW pinch rollers with FREE NEW main drive belt!    
NOW WITH A NEW BELT INCLUDED!!!


Replacement OEM Pioneer RT-909 Reel-to-Reel tape deck Pinch Rollers:
 

These are OEM, fresh rollers with new rubber and new brass bushings for your RT-909 / RT-901 Reel to Reel Deck. If yours have never been replaced or are over 8-12 years old, it's time. If your pinch-rollers are causing mis-tracking, slipping, excessive Wow & Flutter, are "gummy", cracked, glazed hard, have rounded-off edges or disintegrating and your belt has turned to "tar", then here you go! Breath new life into your classic Pioneer RT-909 RT-901 tape recorder. These have been discontinued a couple of times in the past with no guarantee of restocking ability, so get them while you can. We currently have a few back in stock. (sorry they will not fit the RT-707. Only the RT-909 & the RT-901)
 

Domestic US Customers   International
Customers

PRICE INCLUDES:

A pair of replacement OEM Pioneer RT-909 Reel-to-Reel tape deck Pinch Rollers

SHIPPING
 
Free NEW Main Drive Belt


Your Price
$87.99

(includes shipping to any of the US states)

PRICE INCLUDES:

A pair of replacement OEM Pioneer RT-909 Reel-to-Reel tape deck Pinch Rollers

SHIPPING
 
Free NEW Main Drive Belt


Your Price
$97.99

(includes Airmail shipping to any other worldwide location)

 

IF YOU PREFER TO PLACE YOUR ORDER BY PHONE,
PLEASE CALL US AT:

719-964-7205



*NOT INCLUDED IN ANY OTHER COMBINED PARTS DISCOUNTS OR SALES

(sorry, we do not have, nor can give out any instructions or advice on the actual repair procedures)

-
-
Revox_10.5-inch_Metal_Take-up_tape_Reel_Reels_web.jpg (14919 bytes)

(click on above thumbnails to enlarge photos)

REVOX
10.5" Black anodized
Aluminum Take-up Reel
for 1/4" tape
Beautiful condition. 
$75. ea.
SOLD
Maxell_10-inch_Reel-Reel_Tape_10.5-Inch_Metal_Reels_box_web.jpg (26791 bytes)   Maxell_10-inch_Reel-Reel_Tape_10.5-Inch_Metal_Reels_reel_web.jpg (20904 bytes)
Maxell_10-inch_Reel-Reel_Tape_10.5-Inch_Metal_Reels_collage.jpg (77586 bytes)

(click on above thumbnails to enlarge photos)

MAXELL
UD-180-35
10.5" Aluminum metal reels 
High Bias 
 Reel to Reel 1/4" Tape
for sale
Pre-owned, HIGH Bias Reel to Reel tape. 1,100 meters (3600 ft.) in length. Most with leaders intact. All include individual box. Most have been used and will have recordings on them (we can bulk erase them for additional charge below). You will need to come up with your own labels as even if they are in the box, they likely aren't "sticky" anymore.
 Used and likely recorded
 
$37.49 shipped*
or
We can also do a "Bulk erase" on your tapes for an additional $1.00 ea.
Used and Erased 2-Packs of Maxell UD 180-35  

$68.50 shipped
 
(while supply lasts)*
SOLD OUT
*
Packed and shipped via Ground shipment to any of the lower 48 states. Other destinations can be calculated.

Sony_10-inch_Reel-Reel_Tape_10.5-Inch_Metal_Reels_box_web.jpg (19611 bytes)   Sony_10-inch_Reel-Reel_Tape_10.5-Inch_Metal_Reels_reel_web.jpg (23678 bytes)
Sony_10-inch_Reel-Reel_Tape_10.5-Inch_Metal_Reels_collage.jpg (64169 bytes)

(click on above thumbnails to enlarge photos)

SONY
SLH
10.5" Aluminum metal reels 
High Bias 
  Reel to Reel 1/4" Tape
for sale
Pre-owned, HIGH Bias Reel to Reel tape. 740 meters (2200 ft.) in length. Most with leaders intact. All include individual box. Most have been used and will have recordings on them (we can bulk erase them for additional charge below). You will need to come up with your own labels as even if they are in the box, they likely aren't "sticky" anymore.
  Used and likely recorded 
$32.49 each 

Only 1-left in stock

including shipping 
(while supply lasts)*
or
We can also do a "Bulk erase" on your tapes for an additional $1.00 ea.

SOLD OUT
*
Packed and shipped via Ground shipment to any of the lower 48 states. Other destinations can be calculated.

-

Teac_Rubber_Reel_Stoppers_web.jpg (18721 bytes)

(click on above thumbnails to enlarge photos)


NEW! FRESH RUBBER!
TEAC
REEL HUB / SPINDLE ADAPTORS / STOPPERS

For Open-reel tape decks. Designed to hold reels on the spindles of decks that did not have built-in Reel locks. These will fit Teac, Akai, Roberts, Rheem, Sony *, Ampex and other reel-reel tape decks that have standard small reel spindles. Easy and quick to take on and off. These are New Stock and made of new rubber. Great to replace your old, dried out / cracked or lost ones.
$24.99. matched pairs
CURRENTLY OUT OF STOCK 6/26/07


* Still best to use Sony decks in horizontal mode unless you have the original Sony Rubber stoppers as they are slightly different. These TEAC stoppers will work with Sony's when used in horizontal position.


 


 


SORRY, WE RECENTLY SOLD OUT OF ALL NAB ADAPTORS WITH NO "LIGHT AT THE END OF THE TUNNEL" ON GETTING MORE NEW.
PERIODICALLY A USED PAIR WILL COME IN, BUT THEY GET SNATCHED UP QUICK. KEEP AN EYE ON THIS PAGE.

 


(click on above thumbnails to enlarge photos)

NEW
TEAC / TASCAM

10.5" x 1/4" NAB
REEL HUB ADAPTORS HUBS

For 1/4" tape decks. Designed to allow decks capable of fitting 10 and 10.5" reels to accommodate them on the standard small reel spindles. Easy and quick to take on and off. Usually in stock. These will fit most Teac, Tascam, Akai, Pioneer, Technics, Sony, Ampex and other reel-reel tape decks that have standard small reel spindles, but can take 10.5" reels. Used and brands available may vary and will likely vary from photo.
$89.99. matched pairs
$54.99 singles / each.


CURRENTLY SOLD OUT OF USED
ONLY 1 NEW ONE IN STOCK
NAB_10_Reel_Hubs_for_quarter_inch_tape_web.jpg (19225 bytes)

(click on above thumbnails to enlarge photos)

USED / VINTAGE
10.5" x 1/4" NAB
REEL HUB ADAPTORS HUBS

For 1/4" & 1/2" tape decks. Designed to allow decks capable of fitting 10 and 10.5" reels to accommodate them on the standard small reel spindles. Easy and quick to take on and off. Usually in stock. These will fit most Teac, Tascam, Akai, Pioneer, Technics, Sony, Ampex and other reel-reel tape decks that have standard small reel spindles, but can take 10.5" reels. Used and brands available may vary and will likely vary from photo.
$89.99. matched pairs
$54.99 singles / each.


SOLD OUT





(click on above thumbnails to enlarge photos)

NEW
TEAC / TASCAM

10.5" x 1/2" NAB
REEL HUB ADAPTORS HUBS

For 1/2" tape decks. Designed to allow decks capable of fitting 10 and 10.5" reels to accommodate them on the standard small reel spindles. Easy and quick to take on and off. Usually in stock. These will fit most Teac, Tascam, Akai, Pioneer, Technics, Sony, Ampex and other reel-reel tape decks that have standard small reel spindles, but can take 10.5" reels. Used and brands available may vary and will likely vary from photo.
$89.99. matched pairs
$54.99 singles / each.


CURRENTLY SOLD OUT



(click on above thumbnails to enlarge photos)

PIONEER PR-220 or 220A
1/4" NAB
REEL HUB ADAPTORS HUBS
Pioneer PR-220 NAB hub adaptors, for 1/4" tape decks. Designed to allow decks capable of fitting 10 and 10.5" reels to  accommodate them on the standard small reel spindles. Easy and quick to take on and off. May need optional shim behind it for tightest fit.

$89.99. matched pairs
 

$54.99 singles / each

SOLD OUT CURRENTLY


SORRY, WE RECENTLY SOLD OUT OF ALL BUT ONE NEW, 1/4" NAB ADAPTORS WITH NO "LIGHT AT THE END OF THE TUNNEL" ON GETTING MORE NEW.
PERIODICALLY A USED PAIR WILL COME IN, BUT THEY GET SNATCHED UP QUICK. KEEP AN EYE ON THIS PAGE.


 
   
 

-

CLICK ON A DEPARTMENT BELOW >
Vintage Walkmans




Taken in front of part of our demo system featuring many of the classic speaker models
from the late 60's, 70's and 80's.
 

 

 

SOLD ITEMS BELOW: SOLD ITEMS BELOW: SOLD ITEMS BELOW:
amco.jpg (97497 bytes)

AMCO
MODEL PM2

SOLD
PioneerRackShelfWithScrews_web.jpg (16691 bytes)

Original
PIONEER RACK SHELF
Cond. 10
SOLD OUT

PioneerRackHandles_web.jpg (30329 bytes)

PIONEER
ORIGINAL RACK HANDLES
SOLD OUT
Stax_Headphones_web.jpg (33738 bytes)

STAX
SR-40
Circa 80's
SOLD
PioneerRackHandles_web.jpg (30329 bytes)

PIONEER
ORIGINAL RACK HANDLES
SOLD OUT
PioneerRackShelfWithScrews_web.jpg (16691 bytes)

Original
PIONEER RACK SHELF
Cond. 10
SOLD OUT

Pioneer_PR-101_web.jpg (20834 bytes)
PIONEER
PR-101

10" aluminum reels for 1/4" tape. These utilize hub adaptors or reel inserts (not included). They are in great shape. No dents or scratches. If you have a Pioneer RT-707, 909 or other Pioneer deck that can fit 10" reels then you should have at least one official Metal Pioneer Take-Up reel.
Cond. 10
SOLD OUT

 

Audio-Technica_ATH-M30_Closed_Back_Professional_Studio_Headphones_web.jpg (44141 bytes)      Audio-Technica_ATH-M30_Closed_Back_Professional_Studio_Headphones_collage.jpg (109182 bytes)
(click on above photos to enlarge)
CheckMarkSmall_web.jpg (792 bytes)warranty
NEW
AUDIO-TECHNICA
ATH-M30
SOLD OUT



-Akai_ATR-10_Reels_collage.jpg (57770 bytes)
AKAI
ATR-10
10" METAL REELS
For 1/4" tape and use with hubs.
NOS still in box!
Cond. 10
Very limited quantity!!!
$55. ea
SOLD OUT
Pioneer_RT-707_PR-85_7-Inch_Metal_Aluminum_Tape_Take-up_Reel_Reels_web.jpg (73508 bytes)
(Click on above photos to enlarge)
PIONEER
7-inch Metal Take-up Reel
Reels
PR-85

7" aluminum reel for 1/4" tape. These are in great shape. No dents or scratches. If you have a Pioneer RT-707, 909 or other Pioneer deck then you should have at least one official Metal Pioneer Take-Up reel.
Cond. 10
$65. 1 just in
SOLD 3/15/04


Kenwood_KH-71_Stereo_Headphones_web.jpg (31684 bytes)
CheckMarkSmall_web.jpg (792 bytes)warranty
KENWOOD
KH-71
SOLD
Vintage Stereo Headphones

Classic "Buckskin" Leather Kenwood KH-71 Stereo Headphones in great condition. Ear cup external covering is real leather. Headband covering is matching finish vinyl. Fully adjustable. 12' black cloth cord also perfect. Normal wear to ear cup padding finish. Work and sound GREAT! Includes our standard 90 day limited warranty.
Cond. 8

SOLD




Marantz_SQA-2_SQA2_Quad_Adaptor_Decoder_web.jpg (32223 bytes)    Marantz_SQA-2_SQA2_Quad_Adaptor_Decoder_collage.jpg (57985 bytes)
(Click on above photos to enlarge)
MARANTZ
SQA-2 SQA2
SQ FOUR CHANNEL ADAPTOR / QUAD QUADRAPHONIC DECODER

If you have a 4 channel Marantz receiver or Int Amp you need this to use it in true 4 channel mode. Comes with the 4-original mounting bolts.
SOLD
Ortofon_T-20_Moving_Coil_Cartridge_Transformer_Head-Amp_web.jpg (34442 bytes)   Ortofon_T-20_Moving_Coil_Cartridge_Transformer_Head-Amp_collage.jpg (65537 bytes)
(click on above photos to enlarge)
ORTOFON
T-20
STEP UP TRANSFORMER / HEAD AMP FOR MOVING COIL  CARTRIDGES

Very handy Ortofon T-20 "Head Amp" to allow your moving coil cartridge to function with pre-amps having only a standard magnetic cartridge phono input. Passive operation. Looks new.
Cond. 9.5
SOLD

 

Akai_RC-20_remote_web.jpg (53930 bytes)
(click on above photos to enlarge)
AKAI
RC-20
SOLD 12/9/03

Tape Deck Remote. Check your owners manual for compatibility (definitely works with X-330D). Tested and works great. 16' long heavy duty cable in great condition with no nicks or cuts. This remote is in like new condition!
1 only.
Cond. 10
SOLD 12/9/03

 

Akai_RC-16_web.jpg (36220 bytes)
(click on above photos to enlarge)
AKAI
RC-16
SOLD 12/9/03

Tape Deck Remote. Check your owners manual for compatibility.  16' cable and 11-pin connector. NOS still in original box!
1 only!
Cond. 10
SOLD 12/9/03

 

 

- - -

 

POLICIES, SPECIFICATIONS, AVAILABILITY, INFORMATION
AND PRICING SUBJECT TO CHANGE  AT ANYTIME  AND
WITHOUT PRIOR NOTICE
and changes may not be posted to web immediately

Information such as "Circa" dates, original values, etc. are to the best of our knowledge. If you are critically concerned, 
you should do
independent research on your own prior to ordering or utilizing this information in any way.


20% restock fee applies to all returns for refund, except
for aluminum Christmas Trees and related accessories which
have a 30% restock fee.
See our "
Warranties / Returns" page via the link below for more details.

$5 Surcharge on all orders under $20.
(except Amazon Linked Book orders)


|   GENERAL INFORMATION     |   *HOME PAGE*   |  CONTACT  FAQ'S  I  SELLING-TRADING    |   CONDITION RATINGS   |   ORDERING / POLICIES   |   WARRANTIES / RETURNS   |   SHIPPING    |   HOLD / SOLD   |  RESTORATION PROCEDURES  I  LINKS   |  CLIENT LIST  |

                                             

ORDERING BY 

E-MAIL:
 

WAIT, before you email or phone
PLEASE READ THIS:
We are not able to do
 APPRAISALS or to ESTABLISH THE VALUE 
of items you have or are thinking of buying from another party, please do not call or email with either of those questions! We cannot respond to those requests.

&
ALSO: When e-mailing be sure to include a
RELEVANT TOPIC, ie: Brand / Model number
in the
SUBJECT LINE. SUBJECT lines left empty, or with SUBJECTS like;
Hello, Hi or similar will automatically be deleted by Anti-Virus / Spam settings.
(Subject lines left empty show up as "No Subject" and are deleted automatically
by our anti-spam settings"

U.S.A.
( Please see / read the "red" paragraphs above prior to hitting this email link or calling)

sales@oaktreevintage.com           


OR
ORDERING
BY PHONE
 
(719) 964-7205
 

9:30 AM- ~7:30 PM most days COLORADO / ROCKY MOUNTAIN TIME ZONE


___________________________________________





PLEASE DO NOT SEND PHOTO FILES
WITHOUT PRIOR APPROVAL. THANK-YOU.


Haven't received a response to your email? See FAQ'S

MAILING:
OAK TREE ENTERPRISES
PO. BOX 6182
COLORADO SPRINGS, CO 80934
U.S.A
.

Before ordering by postal mail, please phone or email us about the item 
and the details of sending your funds. Thank-you.


THE  ABOVE  INTERNALLY  LINKED   PAGES  SHOULD  ANSWER  MANY OF THE
QUESTIONS  YOU  MIGHT HAVE.  THANK-YOU.


PLEASE BE SURE TO READ OUR "SELLING / TRADING" PAGE
PRIOR TO CONTACTING US ABOUT ANY ITEM'S YOU HAVE
TO SELL OR TRADE. THANK-YOU

Copyright © 1997-2008 Oak Tree Enterprises
All manufacturer and product names are copyrights of their respective owners. 
All photos and text contained within this site are protected and may not be 
reproduced or used elsewhere, in anyway, without including the original credit tags / text. They also must be used / reproduced in their original form and include a complimenting credit to Oak Tree Vintage for their creation. This of course includes using OUR photos and OUR text in YOUR auctions / listings
"WORLD AC POWER" ™ is a trademark of Oak Tree Enterprises.
All Rights Reserved. Site created with "Front Page" and is likely best viewed with Internet Explorer . Will likely work on most other browsers as well.